Yahoo Groups archive
Thread
2001-12-28 by markhahn2000
I am trying to install a MIS CFS on my 1160 and have used the CFS Vacuum Pump to prime my carts. Even after letting the carts sit for 4 hours the sponges in the front of most of the color cart are not filled with ink, is this ok? Above the inkjet port there seems to be plenty of ink. thanks, mark
2001-12-29 by Barry Kelsall
Prop the carts over a pencil & let them sit overnight - the ink should work its way down to the ports. Your patience will pay off. -BK
> -----Original Message----- > From: markhahn2000 [mailto:markhahn2000@...] > Sent: Friday, December 28, 2001 3:03 PM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] MIS CFS install Q > > > I am trying to install a MIS CFS on my 1160 and have used the CFS > Vacuum Pump to prime my carts. Even after letting the carts sit for > 4 hours the sponges in the front of most of the color cart are not > filled with ink, is this ok? Above the inkjet port there seems to be > plenty of ink. > > thanks, > > mark > > > > Please visit the Group Homepage to check the Files, Bookmarks, > Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier > messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or "flames." > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the > various resources on the homepage. > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >