Yahoo Groups archive
Thread
2006-03-29 by mbrouphy
To All: I just purchased a new Epson 1280 to be a dedicated B/W printer for my infrared images, both digital and scanned film. I plan to use the MIS UT2 ink set on this printer. I'm looking for some advice to hit the ground running, so to speak, on effectively working with this printer/ink combination. Any initial assistance, links, reference sources, etc would definitely be appreciated. Thanks, Mike
2006-03-29 by Edward Wiseman
MIKE.. A. Follow Paul Roark's workflow, available link on MIS SITE OR B. Spend another $50.00 and get Harrington's QTR ( I think you'll find the link also on the MIS SITE..) EITHER will give you GREAT results!..I find myself using the QTR more frequently, as it seems a little more "intuitive" for me... Eddie Wiseman
----- Original Message ----- From: "mbrouphy" <mbrouphy@...> To: <DigitalBlackandWhiteThePrint@yahoogroups.com> Sent: Wednesday, March 29, 2006 2:09 PM Subject: [Digital BW] Epson 1280 and MIS UT2 Inks To All: I just purchased a new Epson 1280 to be a dedicated B/W printer for my infrared images, both digital and scanned film. I plan to use the MIS UT2 ink set on this printer. I'm looking for some advice to hit the ground running, so to speak, on effectively working with this printer/ink combination. Any initial assistance, links, reference sources, etc would definitely be appreciated. Thanks, Mike Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
2006-03-29 by Paul Roark
My Readme is getting a bit out of date, but still where I'd start. See http://home1.gte.net/res09aij/UT2-Readme.htm I'd get a couple empty carts and fill one with MIS Cleaning fluid (to be put in whenever the printer is not going to be used for a week) and I'd fill the second cart with Windex (to be used every so often to clean out the head). Paul www.PaulRoark.com
> -----Original Message----- > From: DigitalBlackandWhiteThePrint@yahoogroups.com > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of > mbrouphy > Sent: Wednesday, March 29, 2006 11:10 AM > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] Epson 1280 and MIS UT2 Inks > > To All: > > I just purchased a new Epson 1280 to be a dedicated B/W printer for my > infrared images, both digital and scanned film. I plan to use the MIS > UT2 ink set on this printer. > > I'm looking for some advice to hit the ground running, so to speak, on > effectively working with this printer/ink combination. Any initial > assistance, links, reference sources, etc would definitely be > appreciated. > > Thanks, > Mike > > > > > > > Please visit the Group Homepage to check the Files, and other resources as > they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to keep > them short. > - Good manners are required at all time. No personal attacks or flames. > Hostile, aggressive or argumentative users may be removed from the > membership without notice. > - Keep your posts and threads related to the group topic of digital B&W > printing. Users who persistently make off-topic posts may be removed from > the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group Owner > and Moderators. See "Group Topic, Rules and Guidelines" in the Files > section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE > PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > >
2006-03-30 by mbrouphy
Paul, Thanks for the info. I'll study it over the next couple of days until the printer and the inks get here. I'll post back on the results. Mike --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@...> wrote: > > My Readme is getting a bit out of date, but still where I'd start. See > http://home1.gte.net/res09aij/UT2-Readme.htm > > I'd get a couple empty carts and fill one with MIS Cleaning fluid (to be put > in whenever the printer is not going to be used for a week) and I'd fill the > second cart with Windex (to be used every so often to clean out the head). > > Paul > www.PaulRoark.com > > > > -----Original Message----- > > From: DigitalBlackandWhiteThePrint@yahoogroups.com > > [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of > > mbrouphy > > Sent: Wednesday, March 29, 2006 11:10 AM > > To: DigitalBlackandWhiteThePrint@yahoogroups.com > > Subject: [Digital BW] Epson 1280 and MIS UT2 Inks > > > > To All: > > > > I just purchased a new Epson 1280 to be a dedicated B/W printer for my > > infrared images, both digital and scanned film. I plan to use the MIS > > UT2 ink set on this printer. > > > > I'm looking for some advice to hit the ground running, so to speak, on > > effectively working with this printer/ink combination. Any initial > > assistance, links, reference sources, etc would definitely be > > appreciated. > > > > Thanks, > > Mike > > > > > > > > > > > > > > Please visit the Group Homepage to check the Files, and other resources as > > they are often being updated. > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > If you wish to receive no emails or just a daily digest, or you wish to > > unsubscribe, please edit your Membership preferences by visiting this same > > page. > > > > Please follow these basic guidelines: > > - As threads develop, trim off excess portions of earlier messages to keep > > them short. > > - Good manners are required at all time. No personal attacks or flames. > > Hostile, aggressive or argumentative users may be removed from the > > membership without notice. > > - Keep your posts and threads related to the group topic of digital B&W > > printing. Users who persistently make off-topic posts may be removed from > > the membership. > > - By posting on this forum you agree to abide by the group rules and > > guidelines, and to abide by the actions and decisions of the group Owner > > and Moderators. See "Group Topic, Rules and Guidelines" in the Files > > section: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT > > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND > > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO > > YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR > > EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF > > PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE > > "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN > > ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE > > OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) > > UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) > > STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT > > YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> > PRINT YAHOO GROUP. > > > > Yahoo! Groups Links > > > > > > > > > > >
2006-03-30 by Steve Kayner
--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@...> wrote: > > I'd get a couple empty carts and fill one with MIS Cleaning fluid... and I'd fill the > second cart with Windex... Excuse my ignorance here, but would that be the 4-color cart (filling all four), or just one individual cart? If just the one, which position? Steve.
2006-03-31 by Paul Roark
Steve, > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" > <paul.roark@...> > wrote: > > > > I'd get a couple empty carts and fill one with MIS Cleaning fluid... > > and I'd fill the second cart with Windex... > Excuse my ignorance here, but would that be the 4-color cart > (filling all four), or just one > individual cart? The 1280 has 2 carts -- one for black ink and one for all 5 color positions. I'd have a Windex and MIS (or other) cleaning fluid set for both cart positions. Paul www.PaulRoark.com
2006-03-31 by finnkrogvig
The 1280/90 uses a color cart with 5 colors. So I expect you need: *one black cart filled with cleaning fluid, *one black cart filled with windex, *one 5color cart with every color position filled with cleaning fluid and *one 5color cart with every color position filled with windex. Right? FinnK --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve Kayner" <kayners@...> wrote: > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark" <paul.roark@> > wrote: > > > > I'd get a couple empty carts and fill one with MIS Cleaning fluid ... and I'd fill the > > second cart with Windex... > > Excuse my ignorance here, but would that be the 4-color cart (filling all four), or just one
> individual cart? If just the one, which position? > > Steve. >