Digital BW, The Print

For several reasons related to my non-photographic
life and some initial problems with incorrect profiles
my 2200 set idle for about 9 months with an originally
new set of piezo NK7's in it.  Last night, finally
with the time and the upgraded QTR profiles loaded, I
fired it up.  No mater what I did I couldn't get the
position 1 Black to fire so I changed that position
only to an MIS Eboni I had on-hand and voila' -
ignition and lift-off.  (I don't have a spare NK7
black to put into the printer at present - not to
mention they are $17 each!)

I know this is a bit wacky - but does anyone know what
the effect of using Eboni (or Epson UC MK for that
matter) would be if the remaining set of NK7's (2-7)
remained in the printer.  Yes, I know I can try it and
indeed I will probably use what's left of this set in
doing so, but didn't want to re-invent the wheel if
someone else had already been down this road.


I also like the idea of using the Eboni for BO
printing  as I don't have experience with the NK 7 MK
for this purpose and just leaving the 2-7 Nk's in the
machine for septone.  Anyone have experience here?

Thanks for your indulgance.

Michael Vendrell

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

No reply to my original question so I'm asking again.
And I admit this is much more prosaic and pedestrian
than the print-off which is a great idea.  I regret I
cannot be there! Michael Vendrell

--- Michael Vendrell <mjvendrell2@...> wrote:

> For several reasons related to my non-photographic
> life and some initial problems with incorrect
> profiles
> my 2200 set idle for about 9 months with an
> originally
> new set of piezo NK7's in it.  Last night, finally
> with the time and the upgraded QTR profiles loaded,
> I
> fired it up.  No mater what I did I couldn't get the
> position 1 Black to fire so I changed that position
> only to an MIS Eboni I had on-hand and voila' -
> ignition and lift-off.  (I don't have a spare NK7
> black to put into the printer at present - not to
> mention they are $17 each!)
> 
> I know this is a bit wacky - but does anyone know
> what
> the effect of using Eboni (or Epson UC MK for that
> matter) would be if the remaining set of NK7's (2-7)
> remained in the printer.  Yes, I know I can try it
> and
> indeed I will probably use what's left of this set
> in
> doing so, but didn't want to re-invent the wheel if
> someone else had already been down this road.
> 
> 
> I also like the idea of using the Eboni for BO
> printing  as I don't have experience with the NK 7
> MK
> for this purpose and just leaving the 2-7 Nk's in
> the
> machine for septone.  Anyone have experience here?
> 
> Thanks for your indulgance.
> 
> Michael Vendrell
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

I have no direct experience with the K7 inks, so take that into
consideration when ou read this.

If you rebuild the QTR setup for the eboni, it should be fine.