Digital BW, The Print

As I mentioned earlier this week, my 7600 has a banding problem.  I'm not mechanically 
inclined to attempt fixing it, and I'm not going to take a chance on a hefty repair service call, 
so I'll be purchasing a 7800.
If any one out there is handy, or wants to take a chance on a 7600 with a banding problem (it 
does give perfect nozzle checks, the white bands just show up in the shadows) I'll entertain 
offers for the printer.  I just replaced 4 of the 220 carts, so it has $400.00 worth of new ink 
in it, a brand new maintainence tank, too.  Also, I have a brand new in the box cutter blade 
($90.00) to go with it.
I am not a commercial shop, the printer has less than 6500 prints through it.  It was always 
maintained under Epson extended warranty (4 years worth) the printer is 4.1/2 years old.
It has matte K ink in it, and comes with a stand.
I'm located in PGH Pennsylvania, so pick up only.
Call or email me directly if you have questions or are interested.
Thanks
David Aschkenas
daschkenas@...
412 363 3458

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "daschkenas" 
<Daschkenas@...> wrote:
>
> As I mentioned earlier this week, my 7600 has a banding problem.  I'm 
not mechanically 
> inclined to attempt fixing it, and I'm not going to take a chance on 
a hefty repair service call, 
> so I'll be purchasing a 7800.
> 

David -  I missed your earlier post, but did you check the Epson web 
site for tech support on this. The FAQs for the 7600 specifically make 
several suggestions for the banding problem, including simply changing 
the speed setting.

On 7/14/07 1:06 PM, "richardeskin" <richeskinphoto@...> wrote:

> --- In DigitalBlackandWhiteThePrint@yahoogroups.com
> <mailto:DigitalBlackandWhiteThePrint%40yahoogroups.com> , "daschkenas"
> <Daschkenas@...> wrote:
>> >
>> > As I mentioned earlier this week, my 7600 has a banding problem.  I'm
> not mechanically 
>> > inclined to attempt fixing it, and I'm not going to take a chance on
> a hefty repair service call,
>> > so I'll be purchasing a 7800.
>> > 
> 
> David -  I missed your earlier post, but did you check the Epson web
> site for tech support on this. The FAQs for the 7600 specifically make
> several suggestions for the banding problem, including simply changing
> the speed setting.
I tried this to no avail.
Thanks
David

-- 
David Aschkenas
915 N. Euclid Ave.
Pittsburgh, PA 15206
412-363-3458

www.daschkenasphoto.com



[Non-text portions of this message have been removed]