Digital BW, The Print

  ----- Original Message ----- 
  From: eappert 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Sunday, July 29, 2007 2:35 PM
  Subject: [Digital BW] 3800 swing and tilt


  Greetings, 

  I unpacked the 3800 about a month ago and have been printing test 
  charts ever since. The charts I printed two weeks ago are all 
  perfect. I am back at it today after a two week break and I cant seem 
  to print at any setting without paper movement. I can actually see 
  the paper swing and jog out of place as it prints the last column of 
  the Eye One RGB test chart. All of the other 26 columns are perfect, 
  only the final column is printed with a ghost. I cannot print charts 
  using the same paaper settings I used two weeks ago without this 
  happening. I have tried wide and wider platen gap settings. I have 
  tried custom paper thickness, but nothing seems to change the final 
  jog-over during paper transport. 

  Any help would be greatly appreciated 

  thank you

  E Appert



   

[Non-text portions of this message have been removed]

From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Gary
Brown
Sent: Monday, July 30, 2007 12:41 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] 3800 swing and tilt

 

Is this what this list is becoming, you have actually had the printer for a
month without printing anything but test charts. This has got to be the best
example of paralysis by analysis I have seen in a long time.

Gary
----- Original Message ----- 
From: eappert 
To: DigitalBlackandWhit
<mailto:DigitalBlackandWhiteThePrint%40yahoogroups.com>
eThePrint@yahoogroups.com 
Sent: Sunday, July 29, 2007 2:35 PM
Subject: [Digital BW] 3800 swing and tilt

Greetings, 

I unpacked the 3800 about a month ago and have been printing test 
charts ever since. The charts I printed two weeks ago are all 
perfect. I am back at it today after a two week break and I cant seem 
to print at any setting without paper movement. I can actually see 
the paper swing and jog out of place as it prints the last column of 
the Eye One RGB test chart. All of the other 26 columns are perfect, 
only the final column is printed with a ghost. I cannot print charts 
using the same paaper settings I used two weeks ago without this 
happening. I have tried wide and wider platen gap settings. I have 
tried custom paper thickness, but nothing seems to change the final 
jog-over during paper transport. 

Any help would be greatly appreciated 

thank you

E Appert

[Non-text portions of this message have been removed]

 



[Non-text portions of this message have been removed]