Doepfer

Enter your vote today!  A new poll has been created for the 
Doepfer_a100 group:

Would you like Doepfer to release a Bit Processing/ Bit Swapping Module?
[a new module with an Analogue to Digital converter,
with analogue cv/audio inputs that accept the input
analogue signals. then the module converts these to
digital logic signals(gates from 0 to 5 volts). let's 
say that in this new module will be an 8-bit
converter. (that means that the A to D converter
changes the analogue input to various combinations of
8 bit's-meaning combinations of 0 and 1's / on and off
gates) then we could have each of the 8 bits as
digital outputs(0-5volts gate outputs) in the module's
front panel and the user could send these 8 digital
outputs to various processing modules like the a166 or
the a162 gate delay or even the a137, or...... then
the processed 8 bits could then be patched again via
digital front panel minijack inputs to this new module
and be converted by its onboard D to A conveter to
analogue signals(cv's and audio) so, this could be an 
analogue/digital hubrid module
that would offer the "digitized" sound for processing
with the a100 modules(via digital minijack outputs on
the front panel). then it would take the processed
digitized bits(via its front panel digital minijack
inputs) and reconvert them to analogue signals(audio
and cv)]
 

  o Yes! 
  o maybe... 
  o no. 


To vote, please visit the following web page:
http://groups.yahoo.com/group/Doepfer_a100/surveys?id=12330127 

Note: Please do not reply to this message. Poll votes are 
not collected via email. To vote, you must go to the Yahoo! Groups 
web site listed above.

Thanks!