Doepfer

Enter your vote today!  A new poll has been created for the 
Doepfer_a100 group:

Would you like Doepfer to release a DIN-Sync to Trigger Interface Module?. 
[Just a simple thing:

- An incoming DIN-Sync should be given as seperate signals on 3,5mm sockets.

- The DIN-Sync Start/Stop Gate-signal should be given additionally as 
separate Start and Stop triggers (required for A-155).

- The DIN-Sync clock should be available also diveded to selectable 
clock rates (1/1, 1/2, 1/3, 1/4, 1/6, 1/8, 1/12, 1/16, ...) in 
rhythmical usable relations! Perhaps also pseudo-shuffled (for 1/12: 
1,3,4,6,7,9,10,12, for 1/16: 1,4,5,8,9,12,13,16).

- counter controlled slave-start/stop action. This is a feature I 
learned to know with the mungo enterprises sync2 (see 
http://home.netspeed.com.au/aistorm/sync2.html): an internal counter 
remembers which clock is the first beat of a bar. If you hit the stop 
button, the clock will go on until the next bar and stop to the first 
hit of the next bar. If you then hit the start button the feature will 
wait until the next bar and start then.

- MIDI-In] 

  o Yes! 
  o maybe... 
  o no. 


To vote, please visit the following web page:
http://groups.yahoo.com/group/Doepfer_a100/surveys?id=12336995 

Note: Please do not reply to this message. Poll votes are 
not collected via email. To vote, you must go to the Yahoo! Groups 
web site listed above.

Thanks!