Doepfer

Providing you are using a Doepfer bus board with your RS10 PSU there
should be no problem. The AD5 plugs into a normal module position on the
buss board then takes power from the 12V rail and converts to 5V which
it puts on the 5V rail.
 
Rgds
 
David
 
David Salter
Senior Project Manager
Reuters Ltd
Tel       +44 20 7542 2402
Mob     +44 7990562402
email    david.salter@reuters.com
RM       david.salter.reuters@reuters.net
 
 

________________________________

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of boward_k
Sent: 13 June 2006 13:48
To: Doepfer_a100@yahoogroups.com
Subject: [spam] [Doepfer_a100] +5V



But then what?I dont see the connection between the a191 and the 
a100ad5....by the way im using an analogue systems rs10 power suply...
> >
> > > ...I just dont understand how to use the A-100AD5.
> > > Anyone familiar with this?
> >
> > >
> > > hello !
> > > its use is totally transparent - just plug it into the busboard 
that the
> > > a-191 is connected to.
> > > as easy as plugging in a module.
> > > best,
> > > dave
> > >



 


To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd.



[Non-text portions of this message have been removed]