The main problem is in this case not the impedance but the audio level. Output levels of electric guitars, basses or microphones are in the mV range (i.e. 1/1000 V) and the impedance is in the MOhm range. The levels of the A-100 are in the Volt range and the A-100 modules have low impedance outputs (typ 10k or even less, that's only 1/100 of the MOhm you mentioned). I don't think that a DI box is necessary. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von bouyakaboy > Gesendet: Freitag, 7. Juli 2006 13:57 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Re: output impedance of a patch and DI ??? > > > The problem is not the cable length but the impedance matching ! > Have you ever try to plug a bass or a guitar directly into a "line in" > soundcard or a mixing console ??? The song is awful because the output > impedance of these intruments is very hight (Mega Ohm) ! Even with a 2 > or 3 meter cable length ! And it drops lot of frequencys :-( > But with a DI witch low down the impedance the sound become cleaner > and beautiful. > > So, the output impedance of a A-100 VCA or mixer seem's to be 10Kohm, > and it's pretty hight. I Think so that low down it with a DI can > improve the sound quality of a A-100 patch. That is the question ! > > Best regards > Julien. > > > --- In Doepfer_a100@yahoogroups.com, Florian Anwander > <Florian.Anwander@...> wrote: > > > > Hi > > > > > Nobody try to record is A-100 with a sound card and use DI ??? > > Nobody answered, because nobody had the idea to do so. ;-) > > > > A DI-Box is not necessary (but of course not wrong) for line outs of > > usual synths as long as the connection between the synth and the input > > of the mixing desk or the soundcard is short enough (not longer than 2 > > or 3 meters), and if the input is a line input too. > > > > You only should use a DI-Box if the cable length is longer, and the > > input is a balanced (Mic-)input. > > > > Florian > > > > > > > > > > > Yahoo! Groups Links > > > > > >
Message
AW: [Doepfer_a100] Re: output impedance of a patch and DI ???
2006-07-07 by hardware@doepfer.de
Attachments
- No local attachments were found for this message.