Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: about polyphony and A-100

2006-07-11 by manlovemusic

-o_o-....hi, levka, how are you? thank for Joost & your infor.
1). oh! i really like the real analog.....cv & gate......but if i have to use va as a vco....i prefer 
software like es2, reason ,moog v modular then va hard synth......
2) of course .....PERFOURMER ......i heard some sample about this machine is not 
bad......but few cv control just the basic..( i mean control by extranl 
controller/device....but it is still a choice...
3)........yeah this is still a choice but still have to control by midi device........a little bit 
difference from my real analog.....cv & gate....!

i haven't buy digital hard ware for a long time scine 2000. i use computer & software 
instead all digital hardware......so i can save more extra money to buy real analog stuff!!!!

best wishes

william
http://www.mousiki.com.hk/


--- In Doepfer_a100@yahoogroups.com, "levka0" <levka@...> wrote:
>
> As I have approached this over the past years, there are three types 
> of options: 
>  (in order of complexity)
> 
> 1) simple and relatively inexpensive:
> Get e.g. a Novation A-station, KS-rack or any other VA module and 
> feed its raw unfiltered VCO signal into a single Doepfer VCF + VCA 
> module; 
> I have found the A-101-1 and A-121 to be working quite good for this.
> Connect the midi-in of an A-190 to the midi-thru of the module to 
> trigger an A-140 EG that feeds into the CV in of the VCF and VCA 
> module(s).
> This will give you digital/VA polyphonic VCO's into a single analog 
> VCF/VCA in with properly synced EG triggering.
> 
> Switch off the internal effects of the VA module, and use a chorus 
> (or one or more of the new A-188-1 BBD's) after the VCA for 
> modulation effects to sweeten your sound.
> 
> 2) more "analog like"
> Get a Vermona PerFourmer analog 4 voice mono/poly synth module.
> It combines great with all Doepfer A-100 stuff.
> CV/Gate can be added to this as an option.
> 
> 3) For real polyphonic analog (like the OB 4 voice):
> Doepfer MCV-24 set up in 4-voice polyphonic mode.
> four A-110 and/or A-111 VCO's
> one A-135 VC mixer (to be used as a quad VCA)
> four (identical) A-100 VCF's of your choice.
> As many A-143-3 LFO's as you like
> 
> The MCV-24 can be programmed to output ADSR signals from its 
> software which can be used to drive the A-135 and the VCF's
> 
> This option is by far the most elaborate and true "poly analog" but 
> requires a lot of modules and time to "program" sounds.
> 
> 
> Best regards,
> Joost
> 
> --- In Doepfer_a100@yahoogroups.com, "manlovemusic" 
> <manlovemusic@> wrote:
> >
> > -o_o-......hi! mr. Dieter, thanks for your reply!!!
> > 
> > --- In Doepfer_a100@yahoogroups.com, <hardware@> wrote:
> > >
> > > So far there are no plans for such a polyphonic module.
> > > 
> > > Best wishes
> > > Dieter Doepfer
> > > 
> > > > -----Ursprüngliche Nachricht-----
> > > > Von: Doepfer_a100@yahoogroups.com
> > > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von 
> manlovemusic
> > > > Gesendet: Montag, 3. Juli 2006 12:03
> > > > An: Doepfer_a100@yahoogroups.com
> > > > Betreff: [Doepfer_a100] Re: -o_o-........about polyphony!!!!!
> > > >
> > > >
> > > > -o_o-......wah! it look so cool, do doepfer have any smailer
> > > > polyphony module?, i just want
> > > > to plan to set up a four or eight voice polyphony 
> system ,...but
> > > > this will happen after i buy
> > > > a100 bs1/2(saving $$$). would u please to tell me more about 
> your
> > > > polyphony modular
> > > > set up?  how to connect???
> > > >
> > > > thanks
> > > > best regard
> > > >
> > > >
> > > >
> > > > i just want to plan to set up a four or eight voice
> > > > system ,share one vcf & one adsr...but this will happen after i
> > > > buy a100 bs1/2(saving $$
> > > > $)
> > > >
> > > > --- In Doepfer_a100@yahoogroups.com, "stulama" <Stulama@> 
> wrote:
> > > > >
> > > > > Hi.I had the same questions a couple of years ago . I ended 
> up
> > > > buying the Analogue
> > > > Systems
> > > > > RS370 Polyphonic harmonic generator. I mainly use A100 
> modules
> > > > but this is a great
> > > > module
> > > > > that sounds amazing running through doepfer filters. You can
> > > > get beautifully rich and
> > > > mello
> > > > > pads if you detune the 6 different voices and nasty edgy pads
> > > > if you run it trough a
> > > > Wasp
> > > > > filter. There is an expander to change the harmonics in real
> > > > time but this only works if
> > > > you
> > > > > are in Mono mode.
> > > > >
> > > > > Stuart
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.