Doepfer

Dieter,

  thank you for your response.  I was indeed looking to have the 155 move to step 1 on 
initiation and I currently manually set it to 8 to achieve this.  I was just curious about a 
labour saving mod.  I quess I'll have to save my pennies to buy an A 154.

Danke,

Stuadh

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> Stuadh
> 
> No. A hardware counter (CD4024) is used in the A-155 (no microcontroller)
> for address generation. The positive transition at the reset input of this
> circuit causes to set all addresses to zero.
> 
> > Hi,
> >
> >   is it possible to mod an A-155 to reset to step 8 rather than 1?
> 
> No. A hardware counter (CD4024) is used in the A-155 (no microcontroller)
> for address generation. The positive transition at the reset input of this
> circuit causes to set all addresses to zero.
> 
> But I can't see a reason to reset to step 8. If you simply "re-define" the
> steps in your sequence (1->8, 2->1, 3->2 ...) you are able obtain the same
> result. Or did I overlook anything ?
> 
> Best wishes
> Dieter Doepfer
> 
> P.S. The A-155 in combination with A-154 has a different behaviour. A reset
> signal does not set to step one but only prepares the unit to jump to step
> one with the next clock pulse. Maybe this is the behaviour you want to have.
> 
> 
> 
> > Yours Aye
> >
> > Stuadh
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>