Doepfer

David,

yes. That's our plan: an miniature multiple (probably three or four, same as
for the A-197). One socket for the cable leading to the scope, the remaining
two or three for the A-100 patches.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von David Salter
> Gesendet: Freitag, 13. Oktober 2006 11:03
> An: Doepfer_a100@yahoogroups.com
> Betreff: RE: [Doepfer_a100] A-100 oscilloscope module
>
>
> Dieter,
>
> I do like the idea.
>
> I assume that the panel kit would have 3.5mm sockets (small multiple)
> and a cable to the scope input so that the scope can sit within the
> signal path rather than have a scope probe with a 3.5 jack on the end?
>
>
> Thanks
>
> David
>
>
> David Salter
> Senior Consultant
> PSG
>
> Reuters Messaging: david.salter.reuters.com@reuters.net
> (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699
>
> Get the latest news at Reuters.com <http://www.reuters.com/>
>
>
>
> ________________________________
>
> From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> On Behalf Of hardware@doepfer.de
> Sent: 13 October 2006 09:12
> To: Doepfer_a100@yahoogroups.com
> Subject: [Doepfer_a100] A-100 oscilloscope module
>
>
>
> For all users who have been asking for an A-100 oscilloscope maybe we
> found
> a solution. The Belgium manufacturer Velleman has available an LCD
> oscilloscope module VPS10 that will fit into the A-100 frame (even
> suitcase
> version). Details can be found here:
>
> http://www.vellemanusa.com/us/enu/product/view/?id=522077
> <http://www.vellemanusa.com/us/enu/product/view/?id=522077>
>
> We consider to offer an A-100 front panel and power supply adapter (the
> VPS
> requires 9V/300mA) so that the scope can be mounted to an A-100 frames
> and
> powered by the A-100 power supply. Unfortunately the VPS10 requires
> 300mA
> and this current would be taken away from the A-100 PSU. Another
> solution
> would be to supply the VPS10 by a standard 9V wall outlet power supply.
>
> We will probably not offer the complete scope module as we do not get a
> better price for the VPS10 than the end user (about Euro 180, i.e. about
> US$220) but only the front panel/power supply kit. The VPS10 has to be
> ordered by the customer. The installation is simple (4 mounting screws +
> 2
> solder point for the power supply).
>
> Let me know what you think.
>
> Bakis, maybe you can start a poll like this:
>
> are you interested in the A-100/VPS10 scope module in general ?
> would you prefer the front panel/power supply adapter (the VPS10 has to
> be
> purchased and added/mounted by the user) ?
> would you prefer the complete module (much more expensive than the
> adapter +
> VPS 10 as Doepfer will have to charge for handling/dealer
> rebate/warranty of
> VPS10) ?
>
> Best wishes
> Dieter Doepfer
>
>
>
>
>
>
> This email was sent to you by Reuters, the global news and
> information company.
> To find out more about Reuters visit www.about.reuters.com
>
> Any views expressed in this message are those of the individual
> sender, except where the sender specifically states them to be
> the views of Reuters Ltd.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>