Doepfer

Hello members and Ingo,

These are the knob postions:
All switches +
Delayclock 10
CV2 0
Audio input 10
Feedback 0
Mix Orig
Only Patchcords in audio in and mix out.
A-110 pulse as source.

First thing I notice is that the mix out output is inverted and a bit
reduced in level, about 80% on a linear mixer. 
Then when you turn the mix knob, the sound level drops. At 3/7 it has
reached its minimum of -10dB compared to the Orig position. At BBD it
has gone up again to -5dB. (I used the VU meter on my mixing desk for
this measurement.)

Other than that is seems to work as it should.
But the level drop is pretty annoying. And I can't imagine that it is
designed this way.

Any sugestions?

By Dirk.

--- In Doepfer_a100@yahoogroups.com, "selfoscillate"
<synaptic_music@...> wrote:
>
> 
> hello dirk,
> 
> on the very first prototypes of the module the output level was
> a bit low, so on the production models the output level was
> increased. maybe the final amplifier in your module has a
> problem. how does your a188/1 loudness compare to the
> loudness of a filter?
> 
> best wishes
> 
> ingo
> 
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "vliesgaard" <vliesgaard@> 
> wrote:
> >
> > If it's a phase problem then it should also get louder when I turn 
> the
> > delay clock knob, that does not happen, it stay's annoyingly low.
> > 
> > Help.
> > 
> > Best Dirk.
> > 
> > --- In Doepfer_a100@yahoogroups.com, Ross Goniakowski <carfull@> 
> wrote:
> > >
> > >  phase problem internally? just guessing....
> > > 
> > > vliesgaard <vliesgaard@> wrote:          Hello,
> > > 
> > > The output level of my new A-188-1 4096 stages is a bit low, 
> espesialy
> > > when the mix is in 5/5.
> > > 
> > > Is this normal?
> > > Can this be ajusted?
> > > 
> > > Thanks in advance.
> > > 
> > > Greetings Dirk.
> > > 
> > > 
> > > 
> > >          
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
>