Doepfer

I installed a new A-113 Subharmonic Generator, which worked normally 
during brief testing. Then I installed (connecting the power cable 
correctly) a Plan B Model 12 filter. On power-up the fuse on the A-
100G6 blew. I removed Model 12 and replaced the fuse. Now the A-113 
doesn't work correctly: It tracks incoming pitch (without dividing) 
outputting a sawtooth wave; knobs affect volume. However, all leds are 
constantly lit and the buttons don't work - I can't set the divisors or 
call or save presets. Oddly enough the Plan B Model 12 works.

If I substitute the A-113 with an A-190 (which also requires additional 
+ 5V from the Low-Cost Adapter) at the same power slot, it works OK. I 
have PSU2.

I wonder, if some kind of resetting or other easy fix is possible?


Best regards
Jari Jokinen