Doepfer

There are some diagrams here:

http://www.doepfer.de/a100_man/a100m_e.htm

You may find other questions answered in the technical sections of the site.

--Chuck


> -----Original Message-----
> From: Ross Goniakowski [mailto:carfull@sbcglobal.net]
> Sent: Saturday, February 03, 2007 2:56 PM
> To: analogue heaven; Doepfer List
> Subject: [AH] wiring a doepfer system q's
> 
> i'm putting together a doepfer expansion rack...i got most of it together,
> but i'm not 100% sure how to apply ac to the power supply (the psu2, the
> newer one)..i see how to hook the buss to the power supply...i'm mounting
> the power supply to steel rails and will run ground to the rack
> chassis/earth ground/ground the rails to the chassis...basically i just
> need to know which pins to put the hot and neutral ac to the doepfer pwoer
> supply, and i'll test the dc power out before plugging in and mods...also,
> i'm using an in-line fuse holder, i assume that goes on the ac hot?
> 
> another thing: from the doepfer site, it's a bit unclear how to plug the
> mods into the buss..they all have the ribbon cable plugged in, where does
> the red wire go? thinking about it now i probably just have to look at the
> cb of the mod and match the singnal...
> 
> 
> i'm asking  on AH/Doepfer List  as Analogue Haven is closed until monday
> and i'm just plugging stuff in at this point, my self assembled rack case
> is ready to go...and  i'll hold no one libel if i fuck up (haha)....please
> feel free to email me directly, i'm on the digest (AH)...
> 
> thanks,
> rg