Doepfer

Uuuups

> Which one you have to use is quite simple: check the amount of ampere 
> youre modules are drawing, think about how many hours they should run 
> without a break, this gives the value for the capacity which is given in 
> mA/h
I should correct this: You should use some capacity which is around 20 
to 30 percent higher.

Also one remark: I used the accumulators directly at the DC connection 
to the modules. So the voltage is not regulated and the tracking of the 
VCOs (and similar parameters) will be not V/Octave !

Florian