Doepfer

i have an older PS that does not hum, but i understand some do...i have a newer one as well and it's fine too...when i was putting together my second rack, i bought a used  back panel, but returned it as it had no fuse holder, and i figured i really didn't need it as i was putting it all in a big rack unit...i simply ran an inline fuse holder off the AC  hot to the PS, works great...good luck...


----- Original Message ----
From: nicholas_kent <nicholas_kent@yahoo.com>
To: Doepfer_a100@yahoogroups.com
Sent: Saturday, June 16, 2007 11:38:35 AM
Subject: [Doepfer_a100] Older G6 frame questions

I picked up what I believe is an older 230v G6 frame. The NT12 PSU says "REV 2" on it. 

I noticed the PSU hums slightly. Though I also noticed one of my other G6 frames sounds 
about the same. But a third NT12 frame I have is quieter. So I just thought I'd ask if it's a 
concern.

The other thing I noticed was the plug socket has no hardware for a fuse. Is that the way 
older units were made or is it someones replacement?




[Non-text portions of this message have been removed]