Doepfer

On 10/30/07, hardware@doepfer.de <hardware@doepfer.de> wrote:
>  If this does not help initialize the MCV4 as mentioned in the user's manual
>  on page 6.
Doh! I should have thought of that - thanks! I'll try this when I get home.
>
>  Pay attention that the correct messages are sent when you program the MCV4 !
>  Some controllers send "hidden" messages that program the MCV4 in another way
>  than one would assume. E.g. if the MCV4 is in the learn mode and the Midi
>  keyboard transmits a Midi control change message before each program change
>  you don't have a chance to adjust the MCV4 with program change messages as
>  the control change comes before the program change and is used to assign the
>  control change number to the free programmable controller of the MCV4.
I haven't consciously sent any messages to reprogram the MCV4 but
might have done so inadvertently. I'll be more careful in the future.

>
>  Good luck
>  Dieter Doepfer
Thanks,
Silas