Doepfer

Well Understood... :)

Something to keep in mind though is that the modules fit will into a PAiA 
or Blacet chassis, though you'll need a drill to rework the holes in the rails.

I have a good number of Doepfer modules, and not a Doepfer chassis in site.

ref:

http://blacet.com/store2.html
BR50K-0, $80 each

http://paia.com/proddetail.asp?prod=FR%2D7&cat=12
$63 each

http://www.analoguehaven.com/doepfer/accessories/
Check the "DIY" kits, or "A-100" bus bar and use a PowerOne supply


And the addiction begins!

Mark
--------
David Bulog (05:20 PM 12/14/2007) wrote:
 >Easier said than done--used ones never appear on the market and a new
 >one is very pricey with shipping
 >On 15/12/2007, at 2:19 PM, Mark Pulver wrote:
 >
 >>
 >> Replace nothing...
 >>
 >> ...buy another rack and keep adding. :)
 >>
 >> ---------
 >> David Bulog (05:11 PM 12/14/2007) wrote:
 >> >I have bought a used A100 mini system in an A-100G3 rack
 >> >http://www.doepfer.de/a100_man/A100_System_Mini.htm
 >> >
 >> >A-110 Standard VCO
 >> >A-114 Dual Ringmodulator
 >> >A-118 Noise/Random
 >> >A-120 VCF1/24dB Low Pass 1
 >> >A-131 VCA logarithm.
 >> >A-138b Mixer logarithm.
 >> >A-140 ADSR Envelope Generator
 >> >A-145 LFO Modulation Generator
 >> >A-190 MIDI-to-CV/SYNC Interface V1.4
 >> >2x Standard VCO A-110
 >> >
 >> >
 >> >I have also purchased an A-112 Sampler and A-106 Extreme MS20 filter
 >> >the A-114 Ring Mod needs to go along with two other 8p modules so I
 >> >can install these two
 >> >Im thinking of removing A-120 VCF1 and A-118 Noise
 >> >My question is that a good call
 >> >
 >> >
 >> >thanks in advance
 >> >David
 >> >
 >> >1
 >> >
 >> >[Non-text portions of this message have been removed]
 >> >
 >> >
 >> >
 >> >
 >> >Yahoo! Groups Links
 >> >
 >> >
 >> >
 >>
 >>
 >>
 >
 >
 >
 >[Non-text portions of this message have been removed]
 >
 >
 >
 >
 >Yahoo! Groups Links
 >
 >
 >