Doepfer

Hi Dieter,

that's a clear "yes" from me to the a137 and a189 suggestions.

la8,
d
On 28. Jan 2008, at 10:50 AM, <hardware@doepfer.de>  
<hardware@doepfer.de> wrote:

> Dear members,
>
> I'm back from NAMM. My Yahoo account has stopped again working  
> during my
> absence. If there were important questions during this time that  
> have not
> been answered please send them to me again. I'm not sure if I have  
> time to
> see through all messages of the group during this time.
>
> NAMM visitors were very interested in the new modules and the CV/Gate
> keyboard. There were also some suggestions primarily for the  
> A-137-2 Wave
> Multiplier II and the A-189-1 Bit Modifier:
>
> A-189-1:
> voltage control of Mode (instead of the 16-position rotary switch)
> ext. clock input for the sample rate (instead of the voltage  
> controlled
> sample rate)
> additional VCA at the signal input to modulate the incoming signal  
> before
> it's processed by the bit modifier
>
> A-137-2:
> output mixer (original + 4 additionally generated signals, in the  
> prototype
> all signals are mixed with the same level, no level controls)
> offset control for the phase shifts (in the prototype the initial  
> phase
> shift is fixed to 90 degrees)
> single outputs for sawtooth and rectangles (i.e. 8 separate  
> outputs), maybe
> as an additional 4 HP module that has to be connected to the main  
> module
>
> Tell me what you think and maybe we will start some polls before we  
> release
> the new modules.
>
> For the CV/Gate keyboard the type of the transpose function has been
> discussed: octave (as it is now) or semitone, maybe we will make it
> adjustable in the config mode (in this mode basic functions like midi
> channel, gate polarity, keybed length and some others are adjusted)
>
> For the other modules (A-138e Quad Triple Crossfader/Mixer/Polarizer,
> A-106-6 XP Filter/Filter Pool, A-132-3 Dual lin/exp VCA, A-134-2  
> Dual VC
> Crossfader) no or only a few suggestions were made.
>
> Provided that no changes are made all new modules will available  
> about April
> 2008. If a module has to be redesigned there will be a delay of  
> about 1-2
> months depending on the extent of the modifications.
>
> The CV/Gate keyboard will be manufactured in February and available  
> about
> end of February 2008.
>
> Best wishes
> Dieter Doepfer
>
>
> 



[Non-text portions of this message have been removed]