Doepfer

actually, yes, an internal PLUS an external clock option would be  
best for the AD/DA. And: the internal clock should have an "insert"  
design, where you have the clock available at an output, normalled to  
the external clock input socket. this way you could insert a logic  
module (like an "and") fed by the internal clock and an external  
one....in the simplest usage this would enable a "sample and hold"  
using a gate for external clock: sampling at internal frq while  
gate=on and holding last value while gate=off.
or of course two audio rate clock signals AND-ed would  probably  
cause very interesting destruction of the sampled input (especially  
interesting with simple input signals).

d


On 28. Jan 2008, at 3:27 PM, Bakis Sirros wrote:

> yes, i agree too!
>
> --- Denis Gökdag <q-art@gmx.net> wrote:
>
> > Hi Dieter,
> >
> > that's a clear "yes" from me to the a137 and a189
> > suggestions.
> >
> > la8,
> > d
> > On 28. Jan 2008, at 10:50 AM, <hardware@doepfer.de>
> >
> > <hardware@doepfer.de> wrote:
> >
> > > Dear members,
> > >
> > > I'm back from NAMM. My Yahoo account has stopped
> > again working
> > > during my
> > > absence. If there were important questions during
> > this time that
> > > have not
> > > been answered please send them to me again. I'm
> > not sure if I have
> > > time to
> > > see through all messages of the group during this
> > time.
> > >
> > > NAMM visitors were very interested in the new
> > modules and the CV/Gate
> > > keyboard. There were also some suggestions
> > primarily for the
> > > A-137-2 Wave
> > > Multiplier II and the A-189-1 Bit Modifier:
> > >
> > > A-189-1:
> > > voltage control of Mode (instead of the
> > 16-position rotary switch)
> > > ext. clock input for the sample rate (instead of
> > the voltage
> > > controlled
> > > sample rate)
> > > additional VCA at the signal input to modulate the
> > incoming signal
> > > before
> > > it's processed by the bit modifier
> > >
> > > A-137-2:
> > > output mixer (original + 4 additionally generated
> > signals, in the
> > > prototype
> > > all signals are mixed with the same level, no
> > level controls)
> > > offset control for the phase shifts (in the
> > prototype the initial
> > > phase
> > > shift is fixed to 90 degrees)
> > > single outputs for sawtooth and rectangles (i.e. 8
> > separate
> > > outputs), maybe
> > > as an additional 4 HP module that has to be
> > connected to the main
> > > module
> > >
> > > Tell me what you think and maybe we will start
> > some polls before we
> > > release
> > > the new modules.
> > >
> > > For the CV/Gate keyboard the type of the transpose
> > function has been
> > > discussed: octave (as it is now) or semitone,
> > maybe we will make it
> > > adjustable in the config mode (in this mode basic
> > functions like midi
> > > channel, gate polarity, keybed length and some
> > others are adjusted)
> > >
> > > For the other modules (A-138e Quad Triple
> > Crossfader/Mixer/Polarizer,
> > > A-106-6 XP Filter/Filter Pool, A-132-3 Dual
> > lin/exp VCA, A-134-2
> > > Dual VC
> > > Crossfader) no or only a few suggestions were
> > made.
> > >
> > > Provided that no changes are made all new modules
> > will available
> > > about April
> > > 2008. If a module has to be redesigned there will
> > be a delay of
> > > about 1-2
> > > months depending on the extent of the
> > modifications.
> > >
> > > The CV/Gate keyboard will be manufactured in
> > February and available
> > > about
> > > end of February 2008.
> > >
> > > Best wishes
> > > Dieter Doepfer
> > >
> > >
> > >
> >
> >
> >
> > [Non-text portions of this message have been
> > removed]
> >
> >
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> [Doepfer_a100] group owner
> http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.myspace.com/interconnectedmusic
> http://www.myspace.com/memorygeist
> http://www.DiN.org.uk
> http://www.musicamaximamagnetica.com
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
>
> __________________________________________________________
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
> 



[Non-text portions of this message have been removed]