Doepfer

Hello - I have a need for a circuit to convert triggers to gates. I have found the Doepfer Trigger Delay created to wide a pulse. Wondering if others need this process and if anyone knows a circuit to address the issue.

Thanks -

Bill


  ----- Original Message ----- 
  From: hardware@doepfer.de 
  To: Doepfer_a100@yahoogroups.com 
  Sent: Monday, May 05, 2008 9:30 AM
  Subject: AW: [Doepfer_a100] Re: A-149-2


  > > Do you mean, that the *knob* settings of A-149-1 affect A-149-2?
  > >
  > > Jari Jokinen
  >
  > In any case the clock of the A-149-1 QRV section affects the A-149-2. I'm
  > not sure if the QRV knob setting and CV affects the A-149-2 too. This
  > depends if the A-149-2 are "pre" or "post" the gating function of
  > the shift
  > register outputs. I'll have to ask Christian who wrote the firmware of the
  > A-149-1 if the gate outputs are affected of if the "raw" shift register
  > states are taken. A detailed description how the A-149-1 works
  > can be found
  > on our website (A-149-1 info page).
  >
  > Best wishes
  > Dieter Doepfer

  I've got the answer from Christian. The CV of the A-149-1 QRV section does
  not affect the A-149-2 outputs as the "raw" shift register data are taken
  for the A-149-2. Only the clock of the A-149-1 QRV section triggers the
  advance to the next state of the shift register.

  Best wishes
  Dieter Doepfer



   


----------------------------------------------------------------------------

    avast! Antivirus: Inbound message clean. 

    Virus Database (VPS): 080504-0, 05/04/2008
    Tested on: 5/5/2008 10:31:18 AM
    avast! - copyright (c) 1988-2008 ALWIL Software.
     



---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 080504-0, 05/04/2008
Tested on: 5/5/2008 10:45:49 AM
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com




[Non-text portions of this message have been removed]