Doepfer

Thanks Dieter,

Bill


  ----- Original Message ----- 
  From: hardware@doepfer.de 
  To: Doepfer_a100@yahoogroups.com 
  Sent: Monday, May 05, 2008 12:42 PM
  Subject: AW: [Doepfer_a100] Tigger To Gate Circuit


  > Dieter - We spoke before on this issue. I may have improperly set
  > the A162 but as I remember even at the shortest of delay lengths
  > it produced too wide a pulse.
  >
  > Someone out there please test the 162 to see if it can properly
  > trigger a gate input on say a 140 ADSR -
  >
  > Thanks,
  >
  > Bill

  The A-162 can be modified easily for shorter pulse width. All you have to do
  is to replace the capacitor C2 (delay time) and C5 (gate length) by a
  smaller one (default is 10uF). If you replace e.g. C2/C5 by 100nF the
  shortest delay and lenght becomes 1/100 compared to the former value.

  Best wishes
  Dieter Doepfer



   


----------------------------------------------------------------------------

    avast! Antivirus: Inbound message clean. 

    Virus Database (VPS): 080504-0, 05/04/2008
    Tested on: 5/5/2008 2:09:18 PM
    avast! - copyright (c) 1988-2008 ALWIL Software.
     



---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 080504-0, 05/04/2008
Tested on: 5/5/2008 2:10:20 PM
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com




[Non-text portions of this message have been removed]