Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

AW: [Doepfer_a100] Re: I need to calibrate my A-185-2: need some instructions please

2008-05-20 by hardware@doepfer.de

> The Module is _very_ useful for me.
> Matching to 0,01% and paying finally a littlebit more would be the
> better Deal at the end,
> IMHO.
>
> thanks
> H.

It would be possible to equip the module with 100k/0,01% mathing resistors
but this would increase the price clearly. The price for an 100k/0,01%
resistor is about Euro 12 for each resistor (e.g.
http://www.buerklin.com/gruppen/KapE/E072800.asp#m, order no. 35E330). In
the A-185-2 eight of these resistors are required which would increase the
price of the module by at least 100 Euro.

If desired we can order 100k/0.01% resistors and replace the 0.1% types by
the 0.01% types.

Best wishes
Dieter Doepfer

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.