Doepfer

hi all,

one of the four EGs is not working properly:
when the sustain = 0, the output is high, without beeing triggered.
however, when a trigger/gate is applied, the envelope stops for the
duration of the signal, and then it goes high again.
with sustain >3, the envelopetriggering behaves normally, but the
output is too low compared to the other EGs on the module.
additionally, decay and relese also affect the triggering behaviour.

acually, i like this - makes nice envelopes, but still id like to know
where the problem may be.

thanks for any help.