Doepfer

Is the tuning accurate when the pitch CV is not patched through the slew
limiter?
I don't use an a170 so I don't know if it's by design, but you may be able
to make up for it by amplifying the CV with an A133 polarizer, or some
mixer/amplifier with <1 gain.

On Fri, Jun 20, 2008 at 5:26 AM, Stu Grimshaw <grimshaw@stugrimshaw.com>
wrote:

>   hello group,
>
> after yesterday evening's failed attempt to tune the doepfer to the
> band, i went searching for the cause this morning, and found it to be
> the a170 slew limiter, which won't give out the same voltage as it
> receives. this applies to both sections of the a170. moreover, the
> tune control on the a110 osc won't go far enough to make up the
> difference. and an octave is no longer an octave anyway, so making up
> the difference wouldn't help.
>
> i assume that this problem is one of design, since both a170s show
> this behaviour. but what are the experiences of other group members?
> does someone know of a eurorack slew limiter that tracks accurately?
> or does everyone peer over the brass players' shoulder to read a Bb
> part :) ?
>
> cheers,
>
> stu
>
>  
>


[Non-text portions of this message have been removed]