Doepfer

The A115 patched through an A162 also works as a simple clock 
divider. Of course, I was only doing that before I got an A160 :-)

Joe

--- In Doepfer_a100@y..., Stinchcombe Timothy <tstinchcombe@q...> 
wrote:
> 
> > i have to say the most note-worthy dicovery i've made recently is 
> > using the a113 as a clock divider.  this is very cool for dividing 
a 
> > clock pulse by odd factors of 3, 5, 6, 7, etc...even better when 
> 
> A simple mod to the A-163 allows it to do this too (as hinted at on 
page 4 of the 163 manual entry). I have soldered a couple of wires 
from the pins of C7 (marked 'C7 2u2' between the big 'PIC' chip and 
the front plate) to a simple on-off toggle switch mounted on the front 
panel. When the switch is open, the module performs as normal 
(dividing audio signals etc.), but when closed it bypasses C7, 
allowing 0-5V pulses from the divided input to be output unadulterated 
(which are fine for feeding into A-160 etc.).
> 
> Tim
> 
> [The views expressed above are entirely those of the writer and do 
not represent the views, policy or understanding of any other person 
or official body. Personal email. This email is personal. It is not 
authorised or sent on behalf of the sender's employer. This email is 
the personal responsibility of the sender.]
> 
> 
> The Information contained in this E-Mail and any subsequent 
correspondence
> is private and is intended solely for the intended recipient(s).
> For those other than the recipient any disclosure, copying, 
distribution,
> or any action taken or omitted to be taken in reliance on such 
information
> is prohibited and may be unlawful.