Doepfer

Some people on my website suggested me to remove completly the top wood part of the 
portable suitecase and to fix then a new aluminium plate fitted with several A-180 PCB. I 
think that it will be the most elegant way to do it. So I've got a question for Dieter 
DOEPFER before I unscrew one of my portable suitecase :

- How the top wood part is fixed ?
- They are 2 black screws on the top, do I have to remove them ?
- Is it involved in the structure of the suitcase ?
- What are the reasins for not fitting some multiples on the top of the suitcases ?

Thanks for your help,

Hédi K.


--- In Doepfer_a100@yahoogroups.com, "hpsounds_fr" <hielo.patagonia.snds@...> 
wrote:
>
> --- In Doepfer_a100@yahoogroups.com, Florian Anwander <fanwander@> wrote:
> >
> > Hi
> > 
> > > http://www.hpsounds.com/2008/10/02/doepfer-3-a180-multiples-for-
portable-
> suitecase/
> > That is a nice idea. As only change I'd recommend to use a U-profile 
> > instead of a rectangular tube, because it will be quite diffcult to 
> > place the multiple pcbs correctly in the eight holes. If the "tube" is 
> > open at the rear side, there is no trouble with this task.
> > 
> > 
> > Florian
> >
> 
> Thanks Florian for your answer and suggestion.
> 
> I've check again but I don't think that U-profil 20 x 20 mm with 1 mm thickness exist. 
We 
> need 1 mm thickness because the A-180 PCB should not touch the aluminium profil for 
> obvious electrical reasons. Yes, with a square "tube" profil, it will be a little bit more 
> difficult to screw the mini-jack sockets. But may be the people at the company which 
can 
> cut and drill for me the profil have better knowledge about aluminium profils. Stay tune !
> 
> Regards,
> 
> Hedi K.
>