Doepfer

Hi M (a city is looking for a murderer ;-))


> How do I get the highest frequency out of an A-110? When I send
> an envelope with sustain set to maximum to one or both CV
> inputs, I get approximately 1200 Hz (that's an estimate, I don't
> have a frequency counter, but I'd like it to go higher).
I think the sum of all CVs should not exceed 10 V. According to the service
manual http://www.doepfer.de/a110_tec.htm the Octave switch gives without
any additional CV a Frequency of around 1kHz at the highest position (+ 2
Oct). This feeds 5V to the summing point, so additional 5 Volts should give
you the highest possible frequency. This is theory, I did not try this in
reality.

I think, the musically usable range of the exponentiator circuit ends
around ~3000Hz. Keep in mind, this is a lowcost VCO.

> How do you set an A-136 Distortion/Waveshaper to "neutral",
> letting a signal pass through the module more or less
> unaffected?
According to http://www.doepfer.de/a100_man/a136_man.htm
 A to 6,5
+A and -A to 12:00 o'clock position

(I don't own a A136)



> I'd like to hear people's opinions about the A-174 Joy Stick. It
> seems to me that having the module fixed vertically in a rack like
> other modules wouldn't be very convenient, placing a joystick flat
> on a table with the stick upwards seems more natural (more
> common at least).
That is true of course; I think in general a more desk like position of the
surface is much better, but it can take a lot of space. A friend owns a
A100 in the suitcase housing: very cool handling!


Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de