Doepfer

Thanks for the response Tim.

> > In this picture:
> > http://3.bp.blogspot.com/_d9uh_FFQZoQ/SW_321zu3zI/AAAAAAAAAFM/vAu-C9ki aw4/s1600-h/a117m.jpg
> > 
> > If I make this simple connection the unit sounds good when something is patched into the ext. Clk input AND can be tuned.
> 
> Sorry, I don't quite follow that - is that both ends of the same wire? If so, it is hard-wiring the internal osc to the 4006 clock input (i.e. just bypassing the switching contact in the jack socket), in which case the comment about it working when something external is connected doesn't make sense to me, nor it being 'tuned'??!
> 

Hopefully I can clarify this last bit.

If I remember correctly from before the unit acted up... the rate knob no longer functions once an external source is used. With the hardwire I did I found that with a external clock source inserted the digital noise returned and was now tunable against the incoming sound.

A better mofd would be to make the lower OSC tunable. 
TD