Doepfer

All righty then, quite ingenious, but that's 2 more modules (which I don't have) used for a very basic function. In wavetable mode there is I believe no need for retriggering. Loop and 1-shot I'll perform on my MPC. I think I will try my hand on DIYing a latching manual gate.

Thank you very much for the input though...

--- In Doepfer_a100@yahoogroups.com, Florian Anwander <fanwander@...> wrote:
>
> Hello Niels
> 
> > Is there any clever trick to achieve this without resorting to 
> > using other modules? 
> What you need is an inverted trigger at note-on.
> 
> Gate----------------+
>    |                 |
> A165/1              |
> +/-Out              |
>    |                 |
> A150 (or A166-AND)<-+
>    |
> A165/2
> InvOut
>    |
> A112
> 
> This will send a continous gate, which will have a short break at the 
> note on. This will reassure that the sampleloop starts with a new note.
> In fact the start will be delayed for about 50ms, but for looping sounds 
> this won't bother. If you reduce value of the timing capacitor in the 
> A165/1, you may narrow this down to 1ms or less. Alternatively you may 
> insert a A162 before the A150 and set its timing to minimum. Then the 
> delay would be around 2ms.
> 
> Florian
>