Doepfer

yes, i know that.

what you do:
allign the red stripe of the ribbon to the pin 1, or red stripe marking on the pcb.
(that means: put the red stripe side of the ribbon cable to the 'pin 1' or 'red stripe' marked pins on the module pcb.
so the empty holes of the ribbon cable should be on the opposite side of the red stripe side.

Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

[Doepfer_a100] group owner

www. parallel - worlds - music. com

www. myspace. com/ parallelworldsmusic

www. myspace. com/ interconnectedmusic

www. myspace. com/ memorygeist

www. DiN. org. uk

www. musicamaximamagnetica. com

www. shimarecords. co. uk

www. rubberrecords. gr

Athens - Greece

--- On Sun, 6/14/09, chefgibby <chefgibby@yahoo.com> wrote:

From: chefgibby <chefgibby@yahoo.com>
Subject: [Doepfer_a100] Re: analogue solutions on a dopfer rack
To: Doepfer_a100@yahoogroups.com
Date: Sunday, June 14, 2009, 5:38 AM











    
            
            


      
      true but the modules have less pins than the cables have holes so i dont know where the empty holes should be top bottom or both any suggestions?



--- In Doepfer_a100@ yahoogroups. com, Bakis Sirros <synth_freak_ 2000@...> wrote:

>

> the analogue solutions modules do not need an adaptor cable. they use the same as doepfer. (the red stripe of the ribbon goes to -12volts on the doepfer busboard).

> 

> but, some analogue solutions modules need a +5volts supply.

> 

> 

> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

> 

> [Doepfer_a100] group owner

> 

> www. parallel - worlds - music. com

> 

> www. myspace. com/ parallelworldsmusic

> 

> www. myspace. com/ interconnectedmusic

> 

> www. myspace. com/ memorygeist

> 

> www. DiN. org. uk

> 

> www. musicamaximamagneti ca. com

> 

> www. shimarecords. co. uk

> 

> www. rubberrecords. gr

> 

> Athens - Greece

> 

> --- On Sat, 6/13/09, chefgibby <chefgibby@. ..> wrote:

> 

> From: chefgibby <chefgibby@. ..>

> Subject: [Doepfer_a100] analogue solutions on a dopfer rack

> To: Doepfer_a100@ yahoogroups. com

> Date: Saturday, June 13, 2009, 5:47 PM

> 

> 

> 

> 

> 

> 

> 

> 

> 

> 

> 

>     

>             

>             

> 

> 

>       

>       i have two analogue solutions modules and am having trouble attaching them to my dopfer rack any suggestions? who makes a ribbon adaptor that will work?

> 

> 

> 

> 

>  

> 

>       

> 

>     

>     

> 	

> 	 

> 	

> 	

> 

> 

> 

> 

> 

> 

> 

> 

> 	

> 

> 

> 	

> 	

> 

> 

>       

> 

> [Non-text portions of this message have been removed]

>




 

      

    
    
	
	 
	
	








	


	
	


      

[Non-text portions of this message have been removed]