Doepfer

Thanks Ingo especially for the tip regarding the A170.
Do I need 2 of the xtreme filter? I thought that the module contains
a LP and HP in one?

Is there a way to shift/to offset a voltage in positive range or
negative range only? I'm thinking to have (i.e. LFO/ADSR) a
positive range (no inversion).

Thanks


--- In Doepfer_a100@yahoogroups.com, "selfoscillate" <synaptic_music@...> wrote:
>
> 
> hello,
> 
> you'd also need:
> 
> another xtreme filter (you need two to replicate the ms20)
> another vca (for example the lowcost dual vca)
> a slew limiter for portamento (if you take the a170 maybe
> you can omit one adsr envelope, as the lower half of the a170
> can be used as a simple envelope too.)
> 
> best wishes
> 
> ingo
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "c6r6u6s6a6d6e6r" <shdoclcdll@> wrote:
> >
> > Hello,
> > 
> > which A100 modules do I need to have the functionality of a (Korg) MS-20?
> > Sorry for this question ;-)
> > 
> > A basic thought would be (referring the MS-20 front panel):
> > 
> > 2x VCO
> > 1x VCA
> > _x Mixer
> > 1x (Extreme) Filter
> > 1x LFO
> > 2x ADSR
> > 1x (Dual) Delay
> > 1x Ring Mod.
> > 1x Noise
> > _x Multiples
> > 1x Ext. In/Env. Follower
> > 1x S/H
> > 1x Voltage Inverter (?)
> > 1x Fixed Filterbank (for low&high cut)
> > 
> > 
> > Thanks in advance for any suggestions.
> >
>