Doepfer

Hi. I made my own multiples  the sockets came from eBay, they came with hex nuts!


  ----- Original Message ----- 
  From: yahoo@doepfer.de 
  To: Doepfer_a100@yahoogroups.com 
  Sent: Monday, October 19, 2009 10:46 AM
  Subject: AW: [Doepfer_a100] A parts question for Dieter...


    > Dieter -
  > I know that most of your modules use the Cliff jacks as connectors
  > but what is the brand you use for PCB's that are parallel to the front
  > panel (like in the A-164-1 and A-182-1)? I have a project to make that
  > I would like to match cosmetically to the rest of my Doepfer rig and
  > would like to use those jacks. I have found a similar Kobiconn jack
  > but it is not normalized. Also as a side question - do you buy your
  > nuts separately? All the jack suppliers I seem to find only offer
  > knurled or slotted nuts and not the nicer hex nuts you use. Thanks for
  > any help you can give.
  > -James
  >
  > James Husted
  > james.husted@mac.com
  > http://www.jameshusted.com

  We order the sockets from a German dealer and I don't know the manufacturer
  of the sockets. They are made by a lot of different companies. So we are no
  longer dependent by one manufacturer only as for the Cliff type. The nuts
  are made as a custom product for us and are ordered in the same quantities
  as the sockets. Consequently we do not sell single nuts (and the nuts are
  more expensive than the sockets because they are a custom made product). I
  can ask our dealer who is the actual manufacturer.

  Best wishes
  Dieter Doepfer



  

[Non-text portions of this message have been removed]