Doepfer

> oh and ;)
>
> since you wrote this
>
> left pin = socket labelled "LFO1" (via 1k protection resistor)
> right pin = inverter output
>
>
> would it be prudent to use a 1k resistor for my lfo2 out jack that im
> adding?
>
> Paul

Yes, I'd recommend that to be on the safe side. Generally such protection
resistors should be used on all outputs unless it's an output that requires
high precision e.g. for VCO pitch control with 1.00V/oct. In this case a
special output circuitry should be used (like the A-185-1 or A-185-2) to
avoid voltage losses caused by a protection resistor.

Best wishes
Dieter Doepfer