Doepfer

Passive aggression is a great name, but with a name like that it needs some
passive diode clipping too :D

On Tue, Nov 3, 2009 at 2:42 PM, Monroe Eskew <monroe.eskew@gmail.com> wrote:

>
>
> I'll see what I can come up with in terms of graphics.
>
> For the title of this module maybe:
> -Passive Attack
> -Passive Aggression
> -Smooth Operator
>
> Have you ever wanted to add an analog voice but run out of envelopes to
> control its volume? This results in a nasty "click" sound when the note
> goes on and off. It is easily fixed by an ADSR or even a slew generator,
> but now you can smooth away those clicks for a fraction of the cost, less
> rack space, and none of the power consumption. Useful attenuator also
> included.
>
> If I get at least 20 requests, average production costs decrease
> significantly, so that is the point at which I'll start making them.
>
> Best,
> Monroe
>
>
> On Sun, Nov 1, 2009 at 11:53 PM, <david.salter@thomsonreuters.com<david.salter%40thomsonreuters.com>>
> wrote:
>
> >
> >
> > Yep agree with Alex
> >
> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> > *
> > David Salter
> > Senior Consultant
> > SSG UKI
> >
> > Thomson Reuters
> >
> > O +44 (0)20 7542 2402X 52402
> > M 07990562402
> >
> > david.salter@thomsonreuters.com <david.salter%40thomsonreuters.com><david.salter%
> 40thomsonreuters.com>
>
> > thomsonreuters.com <http://thomsonreuters.com/>
> >
> > P Please consider the environment before printing this e-mail
> >
> > ________________________________
> >
> > From: Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com><Doepfer_a100%
> 40yahoogroups.com>[mailto:
> > Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com><Doepfer_a100%
> 40yahoogroups.com>]
>
> > On Behalf Of Alex Pearson
> > Sent: 29 October 2009 20:21
> > To: Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com><Doepfer_a100%
> 40yahoogroups.com>
>
> > Subject: Re: [Doepfer_a100] passive circuit modules!
> >
> >
> > Make some sexy graphics for this and I will totaly take one with 1&2!!!
> >
> > On Thu, Oct 29, 2009 at 4:58 PM, Monroe Eskew <monroe.eskew@gmail.com<monroe.eskew%40gmail.com>
> <monroe.eskew%40gmail.com>
> > <mailto:monroe.eskew%40gmail.com <monroe.eskew%2540gmail.com><monroe.eskew%
> 2540gmail.com>> >wrote:
>
> >
> >
> > >
> > >
> > > Would you be interested in a 4HP module with one attenuator and one
> > > slew, for 30 USD?
> > >
> > > After having been very pleased with a DIY project, I want to see if I
> > > can spread the happiness. I would like to gauge interest and sales
> > > potential for the following:
> > >
> > > A module consisting of two independent circuits, drawing 0 mA from
> > > your system. The circuits to choose from are:
> > >
> > > 1) Attenuator. One level knob.
> > > 2) Simple RC filter (lowpass). One frequency/period knob.
> > > 3) Simple highpass filter, ditto.
> > >
> > > My favorite idea is to combine 1 and 2. The filter can be used to
> > > shape audio signals, but it will not sound as good as a powered LPF
> > > like the RS100. The main idea is to make the range of the cutoff
> > > frequency very low so that it acts as a slew module or an ASR
> > > envelope. This actually works very well. You can get a soft attack
> > > and a very natural, acoustic sounding release, straight from your Gate
> > > signal (or a rectangle wave).
> > >
> > > I doubt there would be much interest in circuit 3. But let me know
> > > what combinations you would want, i.e. 1&2, 1&1, 2&2, 2&3, etc.
> > >
> > > I could put these into a nice, printed 4HP panel and sell them for
> > > probably around $30 a piece. Any takers?
> > >
> > > Monroe
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > This email was sent to you by Thomson Reuters, the global news and
> > information company.
> > Any views expressed in this message are those of the individual sender,
> > except where the sender specifically states them to be the views of
> Thomson
> > Reuters.
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>  
>



-- 
Dustin Sedlacek
Marketing Concepts
901-828-6801


[Non-text portions of this message have been removed]