Doepfer

the adjustment procedure can be found here

http://www.doepfer.de/home_e.htm

scroll down a bit to find it (in english), i would recommend reading all of
the adjsutment section before doing it :)

Paul

On Sun, Nov 22, 2009 at 6:44 PM, propane23 <propane23@yahoo.com> wrote:

>
>
> I seem to have an issue with the tuning on one of my A110 VCOs.
>
> Normally when i'm going to play i let my modular warm up for about 20 or 30
> mins and then tune the oscs, and they stay in tune fine, but one of the VCOs
> had it's in tune point right at the top end of the tuning pot. Now that
> seems to have shifted a little so i cannot tune that osc as the knob doesn't
> go any further right, and doesn't have enough range for me to switch to an
> octave up and tune it down either.
>
> Is there an easy fix for this without the module needing to go back to mr
> doepfer? Like a tuning trimpot on the board or something, or a resistor i
> can swap out?
>
>  
>


[Non-text portions of this message have been removed]