Doepfer

I'm the guy who was wondering in the eailier post. Composite video can come in three different standards - NTSC, PAL, and SECAM. The main differences are the number of lines in the picture, the frame rate,  and the frequency of the subcarrier used for color information. If the VD-01 displays in B&W then most of the differences from PAL and NTSC are not involved (since they have to do with color subcarrier frequencies). The lines per frame and scanning rates (625lines@50hz vs 525lines@60Hz) probably don't matter much with this type of signal. They would with the output of a video player. If you want the nitty-gritty on the formats:
http://en.wikipedia.org/wiki/Composite_video
http://en.wikipedia.org/wiki/NTSC 
http://en.wikipedia.org/wiki/PAL

-James


On Dec 31, 2009, at 4:37 PM, DAVEVOSH@aol.com wrote:

> 
> 
> hello,
> during some recent postings about the  vd-01  someone wondered  whether it 
> output a "pal" or "ntsc" signal. my reply was that i used it with  both an 
> old tube composite video monitor and a modern flat screen one.
> on reflection, i found myself wondering if the "pal / ntsc" even  mattered  
> - ?
> my reaoning - and i could be grossly wrong as i`m in no way a video expert  
> -  is that the  vd-01  puts out a composite video signal. "pal /  ntsc" are 
> television signal transmission standards and shouldn`t matter with a  
> direct video image.
> question - is this right or wrong ? anyone know ?
> best,
> dave
> 
> 


[Non-text portions of this message have been removed]