Doepfer

> I'm also having this problem with my A-125.  It seems to have
> gotten worse over time.  I mentioned it a while ago on the list
> but got no response.  Anyone?  Dieter, are you listening?
>
> Paul McLean
> Denver, CO

Indeed the A-125 is a bit noisier than other modules (like filters or VCAs)
because of the circuit with several serial opamps and FETs. But if one pays
attention that the max. audio input level is used (i.e. near clipping) no
noise problems should occur. And if you use a VCA in your patch the VCA
should be after the phaser (same as for filters). In any case it important
to have sufficient audio input level. If you use e.g. an A-110 as audio
input and there still an audible noise at the A-125 output something is
wrong and the module has to be checked.

Best wishes
Dieter Doepfer