Doepfer

No reply here but, for future seekers after the same information, James Husted of Synthwerks replied on another forum that the bus rails can be connected between the CV & Gate pins of any unused headers using the A-100BC cable.

A doepfer cable long enough to reach from the top to the bottom bus rail in a 9U case would be useful though.

Matt

--- In Doepfer_a100@yahoogroups.com, Matt <matt.fretton@...> wrote:
>
> I have a P9 suitcase and bought some A-100BC CV/Gate bus connection cables
> but they're too short to connect the bottom to the top bus rail. Also,
> although there are three bus rails in the P9, it seems it's only possible to
> connect two of them together with the CV/Gate cables.
> 
> Does anyone have a suggestion of where I can find ready-made cables of a
> suitable length to connect the bottom to the top rail & how I could connect
> all three rails?
> 
> Otherwise does anyone know a UK source for the connectors (what are they
> called?) and which sort of cable I should buy to solder my own connector
> cables?
> 
> Thanks, Matt
> 
> 
> [Non-text portions of this message have been removed]
>