Doepfer

I take the LFO square output with adjustable pulse width.

I run that square output to a EG and run the an inverted version of that square to another EG.  Both have no attack, sustain, or release and just a little bit of delay.

This creates a railroad style pair of blinking lights, which can be adjusted or swung with the pulse width control on the LFO.

Then I mix the two gate outputs in a mixer.

At the output, you have a clock signal swung to whatever duty cycle you put your adjustable pulse width LFO at.

-Dan



On May 26, 2011, at 5:08 AM, Denis G�kdag wrote:

> You could use a step sequencer to control a trigger delay using one of the CV rows, and patch one of the trigger outs into the trigger delay. That should allow to adjust timing per step.
> 
> Best,
> Denis / SSFX
> 
> On May 25, 2011, at 7:33 PM, Raul wrote:
> 
> > My belief is that modulating the clock rate will do the trick. I would modulate my voltage controlled lfo with a second lfo to get a shuffle feel. but there are other ways. Maybe even introducing delay to the clock signal?or voltage controlled delay of the clock signal? 
> > Maybe someone else will take it from here. I'm going to test it tonight. 
> > 
> > --- In Doepfer_a100@yahoogroups.com, Igor Medeiros <igormpc@...> wrote:
> > >
> > > and how could i do shuffle beats with an a152?
> > > 
> > > thx in advance
> > > igor
> > > 
> > 
> 
> [Non-text portions of this message have been removed]
> 
> 



[Non-text portions of this message have been removed]