Doepfer

Great. This is exactly what I needed. Thanks. 
-Raul

--- In Doepfer_a100@yahoogroups.com, James Husted <james.husted@...> wrote:
>
> Typically you use a A-100BC cable ( http://www.analoguehaven.com/doepfer/a100bc/ ) to connect the two busses together. This also connects the left and right sides of each bus together. You can also connect the two bus boards with a standard 16-pin power cable. Just connect it between 2 unused headers (one on each bus). BEWARE- Make sure you have the orientation correct on the cable before powering up the unit otherwise you risk blowing up your power supply.
> -James
> 
> 
> On Aug 23, 2011, at 11:13 PM, Zoë Blade wrote:
> 
> >> Is this true for the second row in a standard mini system. Or do I have to make a connection. I have no oscillators plugged into the second row but just would like to know my options for the future. 
> > 
> > As far as I understand, each row's bus is separate by default, but it's super-cheap to buy a cable that links them together in the middle.  See page ten of the complete manual: http://www.doepfer.de/a100_man/A100_Manual_complete.pdf
> > 
> > Hope that helps,
> > Zoe.
> > -- 
> > http://zoeblade.bandcamp.com/
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> >
>