Doepfer

Hello

Am 24.08.2012 15:04, schrieb Janne Gson Berg:
> Is the pot itself broken, or is there anything else I should try to pin down the problem?
You might try to measure the voltage between the centerpin of the 
potentiometer and ground.
Check, whether this voltage changes, if you turn the potentiometer.
Then track the copperline from the centerpin on the pcb whether this 
voltage is transported correctly to the socket of the CD4051 and also 
check whether it appears at the IC pin itself.

Florian
-- 
http://fa.utfs.org/