Doepfer

--- In Doepfer_a100@yahoogroups.com, "isoldeandisobelle" <isoldeisobelle@...> wrote:
>
> Hi again,
> 
> Whilst using my A-143-2 Quad ADSR, I have noticed that with a constant gate signal present at envelope 1, all envelopes set at low and all ADSR settings (ie: A0 D10 S10 R0) identical on all four - the third envelope does not remain constant, the LED slowly dims and the audio signal for this envelope fades with it, whilst the other three remain on until the note is released - if I apply the gate directly to envelope three, then the same behavior occurs.... the High & Medium switch settings seem to be behaving correctly.
> 
> Is this some oversight of mine or maleficent ghosts in the machine!?
> 
> Kind regards
>
Hello,

Does anyone have any suggestions about this?

I have been searching a couple of forums today and it seems a few others have had the same or similar problem whilst using this module.... it is still under warranty with Thomann so maybe I should return it.

Best wishes