Deiter, thank you for your prompt response. I did as you suggested, and my Dark Energy 2 behaves correctly when driven by my Dark Energy 1's ADSR envelope output into its VCA input. I then unplugged the connection into the Dark Energy VCA input, attempted to drive my Dark Energy 2 from its own ADSR generator, This no longer works. This confirms your theory that the my Dark Energy 2 has a fault. I will return it to the UK Distributer (EMIS) for repair. Thanks again, Blair --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote: > > > Hi, > > > > I am an A-100 users group newbie, with a question that hopefully > > has simple answer. I have Doepfer Dark Energy mk1 and mk2 > > semi-modular synths, and a few other A-100 modules. > > > > When I play alternate notes quickly on the Dark energy synths, on > > the mk1 the volume stays at the same level, but on the mk2 the > > volume increases, until it is about twice as loud as the initial > > level. I have experimented with different settings on the > > envelope generator and VCA, but the effect is constant. My A-100 > > ADSR and VCA modules don't behave like this, neither does my Dark > > energy mk1. > > > > Is this typical for the dark energy mk2's? If so is there any > > calibration which might fix it? > > > > Thanks in advance for any help, > > > > Blair > > The envelope generators of Dark Energy I and Dark Energy II are exactly the > same and should generate the same result with the same settings (i.e. same > A, D, S, R and range). I have no explanation for this behaviour. Please try > this: use the envelope generator of the Dark Energy I to control the Dark > Energy II. If then the behaviour of the Energy II is as expected probably > the envelope generator of the Dark Energy II has a fault and has to be > repaired. > > You may also connect the two units the other way round (i.e. use the > envelope generator of the Dark Energy II to control the Dark Energy I) to > find out if it's a problem of the envelope generator of Dark Energy II. > > Best wishes > Dieter Doepfer >
Message
Re: Doepfer Dark Energy mk2: unusual ADSR or VCA behaviour
2013-09-04 by blair.cowan
Attachments
- No local attachments were found for this message.