Doepfer

Just using a multiple isn't quite the same as the A-185 is buffered.  

Nick


> On Nov 6, 2013, at 1:26 AM, "squidb0i" <endif.org@gmail.com> wrote:
> 
> If I understand the docs correctly, you need a 185-1 in each case to bridge between communication lines on the power bus bar for each case. 
> 
> Obviously, one can also simply mult the control voltage as needed normally, with patch cables, and run to each oscillator, for the same effect. 
> 
> --- In Doepfer_a100@yahoogroups.com, <karelvanbezooijen@...> wrote:
> >
> > Please tell me if I'm right or wrong.
> > 
> > I have a few cases with modules:
> > 
> > Case 1: standard basic system 2 with 2 x VCO 110 and A-190
> > Case 2: another case with 3 x VCO 111 plus A-141 VCADSR.
> > 
> > In order to control Case 2 with the same gate and CV from the A-190 I only need an A-185-1 in Case 2.
> > When I connect The A-190 to the A-185-1 it should be allright, right?
> > 
> > I read the A-185-1 manual but why should I also put an A-185-1 in Case 1?
> > 
> > 
> > regards,
> > Karel van Bezooijen
> >
> 
>