Doepfer

Just to answer the question: yes, if you plug cables into the cv/gate 
outputs on the front of the 190 it still sends those signals to the buss.

So, right now I have my envelope generators on the same buss as the 
190 and they get the gate signal through the buss. But I also take 
the gate and CV out of the front of the 190 to a 185-1 on another 
buss where my oscillators are housed. The oscillators get the cv 
through the buss, but I can also use the outputs on the front of the 
185-1 to control other modules at the same time.

Scott
www.scottfromcanada.com


At 04:31 AM 11/6/2013, you wrote:

>When you use the front pitch and gate outputs on the A-190, does it 
>still send the signals to the bus as well, or are they mutually exclusive?