Doepfer

Hmmm, may be one of us does not understand. I try to explain my thoughts:

If you want to control the start/stop buttons externally, there is the 
usually the fact, that you also have some external device (for example a 
drum machine) to which you want to sync the sequencer to: the sequencer 
is the slave, and the external device is the master. If you press start 
on the master, it shall control the startbutton of the sequencer too.

But if there is no such external device, means: if the sequencer runs 
with its own tempo, and external start is usually not required, then 
simply press the start button on the sequencer.



So: what is your requirement to start the sequencer not via the start 
button?



Am 10.11.2014 11:03, schrieb Neil Kagan blinkenlicht@yahoo.com 
[Doepfer_a100]:
>
> That's my question! I'm asking what other A-154 owners have used,
> ideally I'd like to use existing doepfer modules to toggle stop/start. I
> tried last night using the voltage controlled switch but it didn't g