Just patch this as you read along.....
A155 #1: top row > A150 (top) input 1, bottom row > A150 (top) input 2, vc input A150 (top) via mult from 1-8/9-16 output A154. Output A150 (top) = first 16 step sequence
A155 #1: top row > A150 (top) input 1, bottom row > A150 (top) input 2, vc input A150 (top) via mult from 1-8/9-16 output A154. Output A150 (top) = first 16 step sequence
A155 #2: top row > A150 (bottom) input 1, bottom row > A150 (bottom) input 2, vc input A150 (bottom) via mult from 1-8/9-16 output A154. Output A150 (bottom) = second 16 step sequence
On Fri, Nov 28, 2014 at 2:13 PM, Steve Jenkins sj230962@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
Thanks Diieter - but I’m still a little confused.
If the 2xA155s are running in parallel and I select first at step 2 and last at step 5 (on the dials - but what I really want to select are step 2 and step13 of a 16 step sequence), then when the first A155 cycles through, the A154 will address steps 2 and 5, and simply cycle between them and step 8 is never reached to trigger steps 9-16. Even when the first A155 has 8 steps the A150 switches to the CV output of the second A155, won’t the fist and last steps still be 2 and 5 be addressed again at the same place on the 2nd unit and stuck in that cycle from steps 10-13?
Sorry for making this sound complicated - I’m sure there is a simple explanation that eludes me :-)
Steve
> On Nov 28, 2014, at 9:03 PM, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>
>> Hi all - did a quick search through the old topics but couldn't find an answer to my question, so here goes...
>> How does the First/Last step controller work when 2x155s are in series, linked by the A150 VCS ?
>> When the 9/16 switch is flipped, does the last step output automatically have 8 added to it so it addresses steps 9-16 on
>> the second A155 ?
>>
>> Example, I want to run random seq/pendulum etc between steps 3-13 : can I do this ?
>>
>> Reason for asking is that my 2nd A155 is in the post today and I wanted to think about this issue before it arrives.
>>
>> Appreciate any advice
>> Steve
>
> Yes, this will work - provided that the A-154/A-155/A-150 are patched correctly. But for both A-155 the steps 1-8 will be addressed
> in parallel. The switching between the stages 1-8 and 9-16 is carried out by the A-150 which is controlled by the 9-16/A3 output of
> the A-154.
>
> Best wishes
> Dieter Doepfer
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
Doepfer_a100-digest@yahoogroups.com
Doepfer_a100-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Doepfer_a100-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/