Doepfer

Just found another user on Muffwiggler who has the same issue: 

 <https://www.muffwiggler.com/forum/viewtopic.php?p=1886065#1886065>Posted: Sat May 02, 2015 9:28 am    Post subject: 	 <https://www.muffwiggler.com/forum/posting.php?mode=quote&p=1886065>  <https://www.muffwiggler.com/forum/ignore.php?mode=add&username=Apfelmann&topic=137589>
had the same Problem, no gates or Triggers as long as i wont send a clock from the a 154 or recieve a clock, never had that Problem before but since i have put it into the lc3 it was there. 

did remove it from the lc3 to put it into my diy case, wich isnt ready yet but ill try as soon as im finished with building the case

Is te LC3 grounded like the other cases are?

Neil

> On 1 May 2015, at 15:01, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> 
> Hi Dieter,
> 
> Ok I have done some more troubleshooting. Once separated again, the A-155 still doesn’t output a trigger in one of the LC3 cases (the ones with he power adaptor) but it does work in the LC 9 and LC base which have a direct mains connector. It also works fine as soon as another socket on the a-155 is plugged into a module in any of the other cases which seems to me a grounding issue but I don’t know why!
> 
> Neil
> 
> 
>> On 1 May 2015, at 12:24, yahoo@doepfer.de <mailto:yahoo@doepfer.de> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
>> 
>> > Hi to you all,
>> >
>> > Just to follow up to my last post about this issue, it seems like it's only the A-155 that is having grounding issues in
>> > the rack. Is this because it gets its grounding via the A-154? Can it have a secondary connector to give it its own ground?
>> >
>> > Neil
>> 
>> I have never heard about grounding problems of the A-154/A-155 combo and there are more than 1000 of these combos in use. Maybe it's
>> only a loose connector. I'd try to dis-connect the re-connect all cables between A-154 and A-155.
>> 
>> Best wishes
>> Dieter Doepfer
>> 
>> 
> 
> 
>